67 Designs Phone Mount: Best Durable Choice 2026
If you want a rugged, modular phone mount, 67 Designs stands out for strength and Jeep-ready fit.
I know the pain of a shaky mount on a rough road. Your phone slips, the view blocks the dash, and every bump turns into a small annoyance. That is where the 67 designs phone mount earns attention. It aims to give a firm hold, clean layout, and an easy upgrade path for drivers who want more than a cheap clip-on holder. If you drive a Jeep, truck, or off-road rig, this style of mount can feel like the right tool for the job.
Bulletpoint Dash Mount Magnetic Cell…
[COMPATIBLE WITH MAGSAFE] this phone holder is designed specifically for iPhones equipped with MagSafe. [SECURELY HOLDS YOUR PHONE] drive over rough terrain with confidence knowing that our MagSafe-compatible phone mount…
Bulletpoint Dash Mount Cell Phone…
[HIGH QUALITY METAL CONSTRUCTION] no plastic here! Our phone holder is made from high strength aluminum and features 3 rubberized grips on the inner surface providing a secure grip on…
Bulletpoint Metal 4-Hole AMPS Base…
[METAL CONSTRUCTION] our 4-hole 20mm AMPS mount is made from laser cut aluminum & features a thin rubber strip underneath to help reduce unwanted vibrations and prevent scratching to the…
Bulletpoint Magnetic MagSafe Holder
This magnetic holder is built for drivers who want a fast snap-on and snap-off phone setup. If you use a MagSafe iPhone, the match feels natural and quick. The 20mm ball design also keeps it in the same family as the rest of the 67 designs phone mount system, so it can fit into a larger rig plan.
I like this kind of mount for daily use because it keeps clutter down. The magnetic grip makes short trips easier, and it is very handy when I need to mount and move my phone often. It is best for people who value speed, clean lines, and a more modern phone mount feel.
Pros:
- Fast magnetic phone attachment
- Clean look with less bulk
- Works well for quick daily drives
- Easy to use with MagSafe iPhones
- Part of a modular 20mm setup
Cons:
- Magnetic use is best for MagSafe phones
- Not the best choice for very heavy phones without proper support
- Requires a compatible mount arm or base
Bulletpoint Phone Holder 20mm Ball
This phone holder is the safer pick for mixed phone households. It works with iPhone and Android phones, which makes it more flexible than a magnet-only design. In a 67 designs phone mount style system, this type of holder gives you a strong middle ground between ease and grip.
I see this as a practical daily driver option. It is the kind of mount I would choose when multiple people use the same vehicle. If you want simple adjustability and broad device support, this is one of the easiest 67 designs phone mount options to live with.
Pros:
- Works with both iPhone and Android
- Good choice for shared vehicles
- Simple and familiar design
- Stable 20mm ball connection
- Easy to pair with other mount parts
Cons:
- Less sleek than a magnetic holder
- Can take a bit more time to load a phone
- Needs the right arm and base to perform best
Bulletpoint 4-Hole AMPS Base Mount
This AMPS base is the foundation piece in the lineup. It gives you a strong metal anchor point with a 20mm ball, which makes it useful for a custom build. If I were setting up a full 67 designs phone mount style dash system, I would think of this as the root of the tree.
The big win here is stability. A solid base matters more than most people think, especially on rough roads. This mount is best for users who want a fixed, clean, and very dependable start for a larger phone or accessory setup.
Pros:
- Strong metal build
- Good base for custom setups
- Compatible with AMPS-style mounting points
- Helps reduce wobble in the system
- Works well in rugged vehicles
Cons:
- Not a full phone holder by itself
- Needs extra parts to complete the setup
- Best for users who like installing gear themselves
Bulletpoint 7cm Carbon Fiber Arm
This 7cm arm is the kind of part that changes the feel of the whole setup. Carbon fiber and Kevlar help it feel tough without looking bulky. In a 67 designs phone mount build, this arm can be the difference between a cramped dash and a clean, usable angle.
I like short arms for rigid control. They often feel more planted and can cut down on bounce. If you want a tight, compact phone position with strong visual appeal, this arm is a smart piece to add to your mount system.
Pros:
- Compact reach for tight spaces
- Strong carbon fiber and Kevlar feel
- Helps keep the phone closer to the dash
- Good for stable viewing angles
- Useful in rugged driving conditions
Cons:
- Short length may not suit every dashboard
- Less flexible than longer arms
- Needs matching ball size to fit properly
Bulletpoint RubiGrid Dash Mount
This is the most vehicle-specific option in the group. It is made for certain Wrangler JL and Gladiator setups, so it feels custom from the start. If you want a 67 designs phone mount style solution that looks like it belongs there, this one brings that factory-style fit.
For Jeep owners, fit matters as much as strength. A mount like this can save time and remove guesswork. I would choose it if I wanted a neat, purpose-built dashboard layout that keeps the phone and other gear in a smart place.
Pros:
- Vehicle-specific fit for select Jeep models
- Clean platform-style layout
- Good for multi-device setups
- Feels integrated, not bolted on
- Very useful for Jeep owners who want a custom look
Cons:
- Only fits certain vehicles
- Not ideal if you change cars often
- May be more mount than some casual users need
My Recommendation
If I had to pick the best overall 67 designs phone mount option, I would choose the Bulletpoint Dash Mount Cell Phone Holder with the 7cm Carbon Fiber + Kevlar Mounting Arm. It gives the best mix of strength, compact size, and daily usefulness. For Jeep and off-road owners, that balance matters a lot.
The magnetic holder is best for MagSafe iPhone users, while the standard phone holder is better for mixed households. The AMPS base and RubiGrid platform are best for custom builds and Jeep-specific setups. The 67 designs phone mount line is strong because it lets you build the exact setup you want.
| Best for | Why |
|---|---|
| MagSafe iPhone drivers | Fast snap-on use and a clean setup |
| Mixed iPhone and Android users | Broad device support and easy daily use |
| Jeep owners and custom builds | Stronger fit, better layout, and more control |
FAQs Of 67 designs phone mount
Is the 67 designs phone mount good for off-road driving?
Yes. It is popular for rough roads because the system is built to feel solid and secure.
Does it work with iPhone and Android?
Yes, several models support both. The magnetic option is best for MagSafe iPhones.
Do I need a specific vehicle?
Some models are universal, but the RubiGrid version is made for select Jeep models.
Is the mount easy to install?
Most parts are simple to install if your vehicle has the right mounting points.
Which part should I buy first?
Start with the base or holder that matches your phone and vehicle. Then add an arm if needed.
Final Verdict: Which Should You Buy?
The best overall pick is the Bulletpoint Dash Mount Cell Phone Holder with the 7cm Carbon Fiber + Kevlar Arm. It gives the best mix of strength, fit, and daily ease in the 67 designs phone mount world.
If you want a tough, clean, and smart phone mount, this lineup is worth a look. The 67 designs phone mount options offer strong value for Jeep and truck drivers who want a real upgrade.
