If you do regular bike maintenance, the bike will stay in good shape and the cost will be reduced if you do this maintenance yourself. And if you can do a little work yourself, you don’t have to run like crazy to the service point for small problems.
And those who regularly ride a bike must know some tuk-tuk jobs. Because the device is not right. Beke can sit at any time.
But you know one thing in most cases there is no major problem behind the sudden shutdown. Most of these you can solve yourself. I want to know why the bike stops suddenly.
Today we will know what can be done in advance to be free from such problems. Let’s start the discussion
Read more: How To Maintain The Throttle and Clutch Cables
1. Regularly change the engine oil after a certain km
Change the engine oil every 1000 km. But it varies by engine oil. Some engines can run from 1500 to 2000 km with oil.
The primary function of motorcycle engine oil is to act as a lubricant. Oil reduces engine noise, keeps other parts of your engine cool, and acts as a seal for the pistons. Oil must be of good quality and consistency of quality and grade for it to function properly.
2. Chain maintenance
The chain is one of the most important parts of a bike. Because the bike’s performance and mileage depend on this chain. Many of us think there is no need to clean the chain with importance. This is a complete misconception. If you want to get a good performance on the bike, you must take care of the chain. However, many people do not know how to clean the bike chain even if they know how to take care of it.
3. Correct tire pressure
Always try to keep motorcycle tire pressure accurate. In this case, how much psi pressure should be kept in the front and back is written in the manual of the bike, you will find it if you try a little. Usually one for a single ride, another for a pillion. However, on wet roads on rainy days, tire pressure must be slightly lower for better grip. Keeping the right tire pressure will give you a better grip, better braking, and better mileage.
4. Air filter
If your motorcycle’s air filter is clogged with dirt and dust, your motorcycle will not be able to breathe properly. This will reduce the power and sub-standard performance of your motorcycle. So the air filter should be cleaned regularly. If the filter shows any signs of deterioration during cleaning, replace it.
5. Use of clutch plate
Many bikers complain about adjusting the clutch lever. But should acclimate yourself to it as fixed once the clutch lever setup is done. The clutch lever relationship is important to ride a bike. Like never half clutch.
And the clutch lever will be released and held very easily. It cannot be explained out loud that you or I are at war with it. And the thing should be flowers even if you catch it and let it go. Nothing in between is possible.
This makes the clutch plate last longer. Yet this whole thing is up to the biker. We can only explain but they have to do the work and do it every day. Many are seen clutching and releasing the clutch so hard that they have to change the plate after a few days. But if you do this, there will be no profit without your loss.
2 thoughts on “How to maintain a Motorbike-5 Effective Bike Engine Maintenance Tips”