Proper maintenance of the motorcycle engine is the key to its durability. All manufacturers provide some maintenance charts for the maintenance of their bikes. Your job is to keep a record of whether and when your motorcycle is regularly serviced. Following the manufacturer’s maintenance schedule for your motorcycle will ensure that it is mechanically sound and that performance improves day by day.
Not knowing in detail about the relationship between the oil filter and engine oil.
What is the function of an oil filter?
The oil filter is the oil filter installed in the bike engine.
It protects the engine from possible damage by cleaning the iron parts and clutch plates caused by the corrosion of the internal parts of the bike engine from the engine oil and supplying clean engine oil to the rings, pistons, and other parts of the engine.
No more messing about the oil filter
What is engine oil?
Engine oil is a type of mineral oil that is used in motorcycles. To many, it is known as Mobil. Engine oil is a daily necessity for motorcycles. The function of engine oil is to keep the motorcycle engine slippery so that the internal parts of the engine can move easily. Besides, engine oil helps to keep the engine cool. Engine oil is also known as motor oil, engine lubricant, or engine oil.
What can happen if you use adulterated engine oil?
Filter and oil relationship
Most of the parts inside the motorcycle engine are metal. Most of these metals are rotating with each other when the bike engine is running.
And because of this position, since those substances are metallic, revolving, and in state with one another, their friction gives rise to certain concepts and various substances.
The work of the wall filter is basically to trap these substances in the different stages and grooves of the oil filter so that these substances cannot enter the engine again and re-enter fresh, clean, pure oil inside the engine.
Bike lovers among us are quite conscious of the engine oil used in their bikes. They try to get the company-specified grade and highest-quality engine oil into the engine.
But after entering the engine oil inside the engine, the role of the oil filter is immense in maintaining the quality of this oil in the places where our negligence and ignorance occur.
The importance of the engine oil to keep the motorcycle engine running is the importance of the oil filter. No matter how good the quality and grade of engine oil you put in the engine, if your air filter is not of that quality, it will show its efficiency inside the engine oil, and the capacity of power is not able to express that.
What can happen if the engine oil and oil filter are not functioning properly inside the engine?
The first thing that will happen is that the normal working power and efficiency of the engine oil inside your engine will be reduced, and it will not be able to provide the lubrication that it was supposed to provide naturally.
If the oil filter is not correct, it will be seen that after a few hundred kilos, the oil filter will be destroyed and the metallic substances will start entering again, due to which the sound of the engine will increase.
If excessive sound comes from the engine of the bike, you may feel discomfort while riding, and due to this discomfort, you may make mistakes on the road.
If the engine oil and oil filter are not functioning properly inside the engine, your bike engine will overheat, and the mileage will decrease.
What are we to do?
The first thing we need to do is select an original, good-quality oil filter of the right grade for your bike. Next, put engine oil of the right grade and from a certified company into your bike’s engine. Check the timing of each engine oil change.
Conclusion
The owner’s manual supplied with your bike correctly states how many kilometers you should change the oil filter for your bike.
